SSC COVERS FOR CX UNITS (SN & SAF)
CX UNITS SSC COVERS
| Shaft Dia. d | Open Cover | End Cover | V-ring Seal | D | B | M | N | V-ring Seal | |||
| SN & SAF Pillow Block | SN & SAF Fixed | 2SN & SAF Expansion (E) | b | b (L) | c | ||||||
| inch (mm) | inch (mm) | inch (mm) | inch (mm) | inch (mm) | inch (mm) | inch (mm) | inch (mm) | ||||
| 1-3/4 in. | SSC10-045 | SSD10 | VS-045 | 3-17/32 (90) | 1-19/32 (40) | 2-9/32 (57.7) | 2-3/64 (52) | 2-1/4 (57) | 31/64 (12.5) | 9/16 (14.5) | 13/64 (5) |
| 45 mm | |||||||||||
| 1-15/16 in. | SSC11-050 | SSD11 | VS-050 | 3-15/16 (100) | 1-1/2 (38) | 2-3/16 (55) | 2-1/16 (52.2) | 2-19/64 (58.2) | |||
| 50 mm | |||||||||||
| 2 in. | |||||||||||
| 55 mm | SSC12-055 | SSD12 | VS-055 | 4-11/32 (110) | 1-23/32 (44) | 2-15/32 (62.6) | 2-11/32 (59.7) | 2-5/8 (65.7) | |||
| 2-3/16 in. | SSC13-060 | SSD13 | VS-060 | 4-23/32 (120) | 1-31/32 (50) | 2-13/16 (71.6) | 2-5/8 (66.6) | 2-55/64 (72.6) | |||
| 60 mm | |||||||||||
| 2-7/16 in. | SSC15-065 | SSD15 | VS-065 | 5-1/8 (130) | 1-15/16 (49) | 2-25/32 (70.6) | 2-37/64 (65.6) | 2-13/16 (71.6) | |||
| 65 mm | |||||||||||
| 2-11/16 in. | SSC16-070 | SSD16 | VS-070 | 5-1/2 (140) | 2-1/16 (52) | 2-15/16 (74.6) | 2-47/64 (69.6) | 2-63/64 (75.6) | 39/64 (15.5) | 11/16 (17.5) | 15/64 (6) |
| 70 mm | |||||||||||
| 2-15/16 in. | SSC17-075 | SSD17 | VS-075 | 5-29/32 (150) | 2-1/16 (52) | 3 (76.3) | 2-51/64 (71.1) | 3-1/32 (77.1) | |||
| 75 mm | |||||||||||
| 80 mm | SSC18-080 | SSD18 | VS-080 | 6-5/16 (160) | 1-31/32 (50) | 3 (76.3) | 2-13/16 (71.5 | 3-3/64 (77.5) | |||
| 85 mm | SSC19-085 | SSD19 | VS-085 | 6-11/16 (170) | 2-3/32 (53) | 3-3/16 (80.8) | 2-63/64 (76) | 3-15/64 (82) | |||
| 3-7/16 in. | SSC20-090 | SSD20 | VS-090 | 7-3/32 (180) | 2-3/16 (55) | 3-5/16 (84.3) | 3-1/8 (79.5) | 3-23/64 (85.5) | |||
| 90 mm | |||||||||||
| 100 mm | SSC22-100 | SSD22 | VS-100 | 7-7/8 (200) | 2-3/8 (60) | 3-21/32 (92.5) | 3-1/2 (88.7) | 3-23/32 (94.7) | |||
| 3-15/16 in. | |||||||||||
| 110 mm | SSC24-110 | SSD24 | VS-110 | 8-15/32 (215) | 2-17/32 (64) | 3-15/16 (100) | 3-25/32 (96.2) | 4-1/16 (103.2) | 11/16 (17.5) | 49/64 (19.5) | 9/32 (7) |
| 4-7/16 in. | SSC26-115 | SSD26 | VS-110 | 9-1/16 (230) | 2-19/32 (66) | 4-1/8 (105) | 3-63/64 (101.2) | 4-17/64 (108.2) | |||
| 115 mm | |||||||||||
| 125 mm | SSC28-125 | SSD28 | VS-130 | 9-27/32 (250) | 2-3/4 (70) | 4-3/8 (111.2) | 4-7/32 (107.2) | 4-1/2 (114.2) | |||
| 4-15/16 in. | |||||||||||
| 135 mm | SSC30-135 | SSD30 | VS-140 | 10-5/8 (270) | 2-3/4 (70) | 4-9/16 (115.7) | 4-15/64 (107.7) | 4-19/32 (116.7) | |||
| 5-7/16 in. | SSC32-140 | SSD32 | VS-140 | 11-13/32 (290) | 2-7/8 (73) | 4-13/16 (122.2) | 4-1/2 (114.2) | 4-27/32 (123.2) | |||
| 5-1/2 in. | |||||||||||
| 140 mm | |||||||||||
SSC COVERS FOR CS & CXC UNITS
CS & CXC UNITS SSC COVERS
| Shaft Dia. d | Open Cover | End Cover | V-ring Seal | D | B | M | N | V-ring Seal | |||||
| 2P,2EP,4P Pillow Block | 4F 4-Bolt Flange | 4FC Pilot Flange | 2P,2EP,4P Fixed | 2P,2EP,4P Expansion (E) | b | b (L) | c | ||||||
| inch (mm) | inch (mm) | inch (mm) | inch (mm) | inch (mm) | inch (mm) | inch (mm) | inch (mm) | inch (mm) | inch (mm) | ||||
| 1-7/16 in. | SSC08-038 | SSD08 | VS-038 | 3-5/32 (80) | 1-13/32 (36) | 2-3/32 (53.2) | 3-5/32 (80.4) | 1-13/16 (45.7) | 1-57/64 (48) | 2-3/32 (53) | 27/64 (10.6) | 29/64 (11.6) | 5/32 (4) |
| 1-1/2 in. | SSC08-040 | VS-040 | 31/64 (12.5) | 9/16 (14.5) | 13/64 (5) | ||||||||
| 40 mm | SSC08-040 | ||||||||||||
| 1-11/16 in. | SSC09-045 | SSD09 | VS-045 | 3-11/32 (85) | 1-3/8 (35) | 2-1/16 (52.4) | 3-5/32 (80.3) | 1-23/32 (44) | 1-27/32 (46.8) | 2-1/32 (51.8) | |||
| 1-3/4 in. | SSC09-045 | ||||||||||||
| 45 mm | SSC09-045 | ||||||||||||
| 1-15/16 in. | SSC10-050 | SSD10 | VS-050 | 3-17/32 (90) | 1-19/32 (40) | 2-9/32 (57.7) | 3-7/16 (87.2) | 1-29/32 (48.8) | 2-1/32 (51.5) | 2-7/32 (56.5) | |||
| 50 mm | SSC10-050 | ||||||||||||
| 2 in. | SSC10-050 | ||||||||||||
| 55 mm | SSC11-055 | SSD11 | VS-055 | 3-15/16 (100) | 1-1/2 (38) | 2-3/16 (55) | 3-7/16 (87.5) | 1-25/32 (45.5) | 2-1/16 (52.2) | 2-19/64 (58.2) | |||
| 2-3/16 in. | SSC11-055 | ||||||||||||
| 2-1/4 in. | SSC11-055 | ||||||||||||
| 60 mm | SSC13-060 | SSD13 | VS-060 | 4-23/32 (120) | 1-31/32 (50) | 2-29/32 (73.4) | 4-9/32 (108.8) | 2-15/32 (62.3) | 2-9/16 (65) | 2-51/64 (71) | |||
| 2-7/16 in. | SSC13-060 | ||||||||||||
| 2-1/2 in. | SSC13-065 | VS-065 | |||||||||||
| 65 mm | SSC13-065 | ||||||||||||
| 2-11/16 in. | SSC15-070 | SSD15 | VS-070 | 5-1/8 (130) | 1-15/16 (49) | 2-27/32 (72.4) | 4-5/16 (109.5) | 2-15/32 (62.7) | 2-33/64 (63.8) | 2-3/4 (69.8) | 39/64 (15.5) | 11/16 (17.5) | 15/64 (6) |
| 2-3/4 in. | SSC15-070 | ||||||||||||
| 70 mm | SSC15-070 | ||||||||||||
| 2-15/16 in. | SSC15-075 | VS-075 | |||||||||||
| 75 mm | SSC15-075 | ||||||||||||
| 3 in. | SSC15-075 | ||||||||||||
| 80 mm | SSC18-080 | SSD18 | VS-080 | 6-5/16 (160) | 1-31/32 (50) | 3-1/16 (78) | 4-27/32 (123) | 2-31/32 (75.6) | 2-3/4 (69.8) | 2-63/64 (75.8) | |||
| 85 mm | SSC18-085 | VS-085 | |||||||||||
| 3-7/16 in. | SSC18-085 | ||||||||||||
| 3-1/2 in. | SSC18-090 | VS-090 | |||||||||||
| 90 mm | SSC18-090 | ||||||||||||
| 100 mm | SSC20-100 | SSD20 | VS-100 | 7-3/32 (180) | 2-3/16 (55) | 3-3/8 (86) | 5-9/32 (134) | 3-1/4 (82.2) | 3-1/16 (77.8) | 3-19/64 (83.8) | |||
| 3-15/16 in. | SSC20-100 | ||||||||||||
| 4 in. | SSC20-100 | ||||||||||||
| 4-7/16 in. | SSC22-110 | SSD22 | VS-110 | 7-7/8 (200) | 2-3/8 (60) | 3-21/32 (92.5) | - | - | 3-1/2 (88.7) | 3-23/32 (94.7) | 11/16 (17.5) | 49/64 (19.5) | 9/32 (7) |
- Clean the V-ring, open cover and shaft.
- Make sure that the shaft is dry and free from grease or oil.
- Lubricate the lip of the V-ring with a thin film of grease or silicone oil.
- Slide V-ring along the shaft by applying pressure and rotating shaft by hand.
- Adjust to obtain "b" dimension for optimum lip pressure.
- Take the drain plug out for the labyrinth seal applications to drain ingressed water.